SDS Section 4: First-Aid Measures

Valenc logo and the title: SDS Section 4: First-Aid Measures

SDS Section 4 tells the reader what to do after an exposure. OSHA Appendix D, Table D.1 requires three things: first-aid measures for each route of exposure, the most important symptoms and effects, and whether immediate medical attention or special treatment is needed.

This section is often read quickly by individuals unfamiliar with the product. It is frequently copied from other SDSs, which can lead to incorrect first-aid advice, especially for corrosive or aspiration hazards.

This guide explains what to include in Section 4, how to develop it based on classification, and key points to review before approval. For the rest of the document, see our guide to all 16 sections of an SDS.

The working rule

Develop Section 4 based on the product’s classification rather than using a template. Each health hazard listed in Section 2 requires corresponding first-aid instructions for the relevant exposure routes, and those instructions must align with the response statements on the label.

What goes in SDS Section 4

ItemWhat Appendix D requiresWhat the reviewer checks
(a)The necessary first-aid measures, divided by route of exposure: inhalation, skin contact, eye contact, and ingestion.All four routes are addressed. Each one reflects the hazards of this product, not a generic liquid or powder.
(b)The most important symptoms and effects, both acute and delayed.Symptoms are named. Delayed effects are included where the toxicology in Section 11 shows them.
(c)An indication of immediate medical attention and special treatment needed, if necessary.Urgency matches the severity of the classification. Any antidote or specific treatment is stated here.

All three items are required. If no relevant information is found for an item, 29 CFR 1910.1200(g)(3) requires the SDS to state that no applicable information was found. Leaving a blank is not acceptable. Appendix D does not specify the order of items within the section.

Section 4 starts in Section 2

First-aid advice appears twice in an SDS. Section 2 includes label elements, such as response precautionary statements assigned by Appendix C to each hazard class and category. Section 4 provides more detailed instructions.

The information in Sections 2 and 4 must be consistent. Appendix C permits minor wording changes to precautionary statements only if the advice is not diluted and remains consistent with the SDS. For example, a label that says to call a poison center immediately, paired with a Section 4 that advises medical attention only if symptoms persist, is a clear contradiction.

The table lists the response statements OSHA assigns to some common classifications. Section 4 should include at least this level of detail for each applicable classification.

Classification in Section 2Response statements in Appendix CWhat Section 4 has to reflect
Acute toxicity, oral, Categories 1 to 3If swallowed: Immediately call a poison center/doctor. Rinse mouth.Treat ingestion as an emergency. Say where to call.
Acute toxicity, inhalation, Category 1 or 2If inhaled: Remove person to fresh air and keep comfortable for breathing. Immediately call a poison center/doctor.Move the person to fresh air, then get immediate medical help.
Skin corrosion, Category 1If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. If swallowed: Rinse mouth. Do NOT induce vomiting. Immediately call a poison center/doctor.Remove contaminated clothing at once and rinse the skin. No vomiting if swallowed. Immediate medical help for every route.
Serious eye damage, Category 1If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a poison center/doctor.Keep rinsing and get immediate medical help, not “if irritation persists.”
Eye irritation, Category 2AThe same rinsing statements as Category 1. If eye irritation persists: Get medical advice/attention.Rinse, and get medical advice if irritation continues.
Skin sensitization, Category 1If on skin: Wash with plenty of water. If skin irritation or rash occurs: Get medical advice/attention.Wash the skin, and say what to do if a rash develops. Symptoms can appear later.
Respiratory sensitization, Category 1If experiencing respiratory symptoms: Call a poison center/doctor.Name the breathing symptoms and give the instruction to call.
Aspiration hazard, Category 1If swallowed: Immediately call a poison center/doctor. Do NOT induce vomiting.State plainly that vomiting must not be induced. Get immediate medical help.

The H and P statement lookup lists statements by code. Our post explains why H and P statements should not be copied from a supplier SDS and why they must reflect your own product’s classification.

Symptoms and effects: acute and delayed

Item (b) requires only the most important symptoms and effects, not the full toxicology, which is covered in Section 11. Focus on what a first aider or physician needs to recognize.

  • Specify symptoms clearly. Phrases like “may cause irritation” are vague. Use recognizable terms such as redness, pain, blistering, coughing, or shortness of breath.
  • Include delayed effects. Some effects appear hours after exposure, or only after repeated exposure, as with sensitization. If Section 11 lists a delayed effect, Section 4 should also mention it.
  • Ensure consistency with Section 11. Section 4 should summarize the health effects from Section 11, without adding unsupported effects or omitting relevant ones.

Immediate medical attention and special treatment

Item (c) addresses both the urgency of medical attention and the need for any specific treatment.

Urgency should match the product classification. Appendix C statements range from “Immediately call a poison center/doctor” for severe hazards to “Get medical advice/attention” for irritation and sensitization. Section 4 must reflect the same urgency as the label.

Appendix C includes the statement “Specific treatment (see ... on this label),” used only when immediate measures, such as a specific antidote or cleansing agent, are required. Section 4 should provide these details. If a product has a known antidote or treatment relevant to physicians, include it here.

A related rule sits outside Section 4. Under 29 CFR 1910.1200(i)(2), if a treating physician or licensed health care professional determines a medical emergency exists, the identity or concentration of a trade secret ingredient must be disclosed immediately. Ensure the people who answer the phone numbers in Section 1 are aware of this requirement.

Common Section 4 mistakes

  • Using generic wording for serious hazards. Phrases like “Get medical attention if symptoms persist” on products classified for skin corrosion or serious eye damage understate the hazard.
  • Incorrect advice to induce vomiting. For skin corrosion Category 1 and aspiration hazard Category 1, the correct label statement is “Do NOT induce vomiting.” Older templates may state the opposite.
  • Omitting exposure routes. Sections that address skin and eyes but omit inhalation or ingestion do not meet item (a). If a route is not relevant, state this explicitly.
  • Omitting delayed effects. Sensitizers and some inhalation hazards may cause effects that appear later. Leaving them out can mean someone stops watching for symptoms too soon.
  • Copying text from a raw material SDS. A supplier’s first-aid section describes the supplier’s substance at its concentration. Your mixture may have a different classification.
  • Inconsistency between Section 4 and the label. Response statements in Section 2 and measures in Section 4 may be written at different times and become inconsistent.
  • Failing to update after reclassification. If a formula change reclassifies a product from irritant to corrosive, Section 4 must be updated accordingly.

A worked review: a corrosive cleaner concentrate

A hypothetical alkaline cleaner concentrate is classified as Skin Corrosion Category 1 and Serious Eye Damage Category 1. The draft Section 4 was copied from a ready-to-use product classified only as an irritant.

RouteDraft textWhat the classification requires
SkinWash with soap and water. Get medical attention if irritation develops.Take off contaminated clothing immediately. Rinse skin with water or shower. Immediately call a poison center or doctor.
EyesFlush with water. See a doctor if irritation persists.Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do, and continue rinsing. Immediately call a poison center or doctor.
IngestionInduce vomiting and drink plenty of water.Rinse mouth. Do NOT induce vomiting. Immediately call a poison center or doctor.
InhalationNot expected to be a route of exposure.Move the person to fresh air and keep them comfortable for breathing. Immediately call a poison center or doctor.

While each line of the draft may be suitable for other products, none of it is acceptable for this one. The symptoms entry also needs to change from “irritation” to burns and serious eye damage, consistent with Section 11.

A repeatable Section 4 workflow

  1. Start from the approved classification in Section 2, not from the previous SDS or a supplier document.

  2. List the health hazard classes and categories, and pull the response statements Appendix C assigns to each.

  3. Write the measures for all four routes. Where a route is not relevant, say so and give the reason.

  4. Add the most important symptoms and effects, acute and delayed, from the toxicology in Section 11.

  5. State how urgent medical help is, and any specific treatment or note for a physician.

  6. Check Section 4 against the response statements in Section 2 and on the label. Resolve any difference.

  7. Have a qualified reviewer approve it, and review it again whenever the classification changes.

Cross-check Section 4 against the rest of the SDS

SectionConnection to Section 4Review question
1, IdentificationThe emergency phone number supports the advice to call.Does the number work, and can it give medical or emergency information?
2, HazardsThe classification and response statements set the content.Does every health hazard have matching first-aid advice?
3, CompositionThe ingredients drive the effects. Some may be trade secrets.Could a physician get the ingredient identity in an emergency?
8, Exposure controlsPPE protects the first aider as well as the worker.Does a responder need protection to help safely?
11, ToxicologyThe health effects are the source of the symptoms.Do the symptoms and delayed effects agree?

The SDS Cross-Check Checklist combines these checks and those for the other 15 sections into a four-page PDF. Our free SDS template for Word organizes Section 4 by route of exposure.

Section 4 outside the US

The content is consistent across major GHS regions. An EU SDS divides Section 4 into three subsections: 4.1 for first-aid measures, 4.2 for key symptoms and effects, and 4.3 for immediate medical attention and special treatment. Canada requires the same three items under WHMIS, in both English and French. Response statements may differ between regions, so the text should be tailored to each region’s classification. See US, EU, and Canada SDS requirements.

How Valenc handles it

In Valenc, a rules engine classifies the product, and the resulting data populates each section of the SDS using phrases from a curated library in over 25 languages. The first-aid text reflects the hazards of the current product, not previous ones. All content is subject to human approval before publication.

To see how this works with your formulations, request a demo. If you want to use your existing documents, our free SDS indexing extracts fields from up to 100 of your SDSs and returns them in a spreadsheet.

Frequently asked questions

What is Section 4 of an SDS?

First-aid measures. It tells the reader what to do after inhalation, skin contact, eye contact, or ingestion, which symptoms to expect, and whether immediate medical attention or special treatment is needed.

What does OSHA require in Section 4?

Three items under Appendix D: the necessary measures by route of exposure, the most important symptoms and effects, both acute and delayed, and an indication of immediate medical attention and special treatment needed.

Does Section 4 have to match the label?

Yes. The response precautionary statements on the label also appear in Section 2, and Section 4 must be consistent with them.

Should Section 4 say to induce vomiting?

Rarely. For skin corrosion Category 1 and aspiration hazard Category 1, the label statement is “Do NOT induce vomiting,” and Section 4 should say the same.

Where are symptoms listed on an SDS?

The most important symptoms are in Section 4. The fuller description of health effects, with the toxicity data, is in Section 11.

Can a route of exposure be left out?

No. If a route is not relevant for the product, Section 4 should say so. An empty line does not meet the requirement.

See first-aid measures built from the classification of your own products, with every decision recorded.

← Back to all posts